Maximum Protection and Convenience for Computers, Notebooks and Other Electronics

3 Modes of protection (L-N : L-G : N-G)
The remaining modes continue to provide protection in the event a mode of protection is compromised as a result of a surge.

EMI and RFI noise filtering
Reduces line noise that can cause data loss and keyboard errors.

Power Line Communications (PLC) compatible
Protects PLC network adapters without interrupting network communications.

Fail Safe Mode
Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC’s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.

Protection Working Indicator
SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.

Overload Indicator
Indicator illuminates when connected equipment draws more power than unit’s capacity. To remedy the condition, unplug less vital equipment.

180 degree Rotating Cord Retainer
A 180-degree rotating cord with strain relief offers flexibility in positioning the SurgeArrest, and in routing the power cord.

Dataline Surge Protection
Provides protection of connected equipment from power surges on the data lines.

Cord management
Reduces cord clutter.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.

Lightning and Surge Protection
To prevent damage to your equipment from power surges and spikes.

SurgeArrest Performance Features & Benefits

Protection

Lightning and Surge Protection
SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.

IEEE let-through rating and UL 1449 compliance
The 'Institute of Electrical and Electronics Engineers' (IEEE) Let-Through Voltage rating is based on a test that subjects a Surge Protector to a 6, 000 volt spike. The rating equates to the amount of excess voltage that reaches connected equipment. The lower the number, the better the performance of the Surge Protector is. Underwriter's Laboratory's UL1449 surge protection safety standard uses these ratings to help users gauge performance. UL's best Transient Voltage Surge Suppressor (TVSS) Let-Through Voltage rating is "300V".

Data-line Protection
Protection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.

Noise Filtering
Attenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.

Phone Line Splitter
Allows use of two pieces of equipment at once, such as a modem and phone.

Safety

Plug Activated Safety Shutters
Shutters protect users from accidental contact with unused outlets.

Overload Indicator
Indicator illuminates when connected equipment draws more power than unit’s capacity. To remedy the condition, unplug less vital equipment.

Adjustable Cable Management
Keeps cords and cables neat and organized.

Catastrophic Event Protection
SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.

Cord management
To help organize power cords.

Fail Safe Mode
Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC’s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.

Protection Working Indicator
SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.

Site wiring fault indicator
In order to work properly, surge suppressors require a correctly wired and grounded outlet. APC surge protectors identify dangerous wiring problems before you plug in your equipment.

Convenience

Transformer Block Spacing
Connect bulky transformer block plugs without covering up other outlets.

180 degree Rotating Cord Retainer
A 180-degree rotating cord with strain relief offers flexibility in positioning the SurgeArrest, and in routing the power cord.

Specification

Product
Product id	526134
Brand	American Power Conversion
Partnr	PL8VT3-DE
EAN/UPC code	731304281399
Warranty (months)	24 months
Power
Surge energy rating	2500 J
AC outlets quantity	8 AC-uitgang(en)
AC outlet types	Type F
Nominal input voltage	230 V
AC input frequency	50 - 60 Hz
Nominal current output	10 A
Peak current, common mode	37500 A
Peak current, normal mode	37500 A
Ports & interfaces
Cordless	N
RJ-11 ports quantity	1
Features
Product colour	Black
EMI/RFI noise filtering	Y
EMI/RFI noise filtering	70 dB
On/off switch	Y
Surge protection features	A/V, Coax, Fax, Modem, Telephone
Response time	0.000001 ms
Technical details
Sustainability certificates	RoHS
Weight & dimensions
Weight	1230 g
Cable length	2.44 m
Width	122 mm
Depth	42 mm
Height	372 mm
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-40 - 85 °C
Operating relative humidity (H-H)	0 - 95 procent
Storage relative humidity (H-H)	0 - 95 procent
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 15000 m
Certificates
Certification	CE, REACH
Indication
LED indicators	Y
Other features
Cable (Coax) protection	Y
Telephone line protection	Y
Audio/video line protection	Y
Input connections	Schuko CEE 7/7P
Packaging content
Cables included	Coaxial, Phone (RJ-11)
Packaging data
Package dimensions (WxDxH)	216 x 51 x 216 mm
Packaging net weight	1.32 kg