LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.

10/100 BaseT Connection
Connect the device to a network using a 10 or 100 BaseT connection

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Scalable runtime
Allows additional run time to be quickly added as needed.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Network manageable
Provides remote power management of the UPS over the network.

InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.

SmartSlot
Customize UPS capabilities with management cards.

LED status indicators
Quickly understand unit and power status with visual indicators.

Serial connectivity
Provides management of the UPS via a serial port.

Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.

Cold-start capable
Provides temporary battery power when the utility power is out.

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Specification

Product
Product id	526185
Brand	American Power Conversion
Partnr	SRT5KRMXLI-6W
EAN/UPC code	064813389905
Warranty (months)	6 year
Power
Replacement battery cartridge	APCRBC140
Input frequency	40 - 70 Hz
Technical details
Sustainability certificates	RoHS, ENERGY STAR
Features
UPS topology	Double-conversion (Online)
Output power capacity	5 VA
Output power	4500 W
Waveform	Sine
Input operation voltage (min)	160 V
Input operation voltage (max)	275 V
Output operation voltage (min)	220 V
Output operation voltage (max)	240 V
Output frequency regulation	50/60 Hz
Surge energy rating	480 J
Efficiency	94.1 procent
Crest factor	3:1
Emergency Power Off (EPO)	Y
Output voltage Total Harmonic Distortion (THD)	3 procent
Noise level	55 dB
Surge protection	Y
Audible alarm(s)	Y
Auto-restart	Y
Ports & interfaces
AC outlet types	C13 coupler, C19 coupler
Power plug	Terminal
AC outlets quantity	10 AC-uitgang(en)
Number of output IEC jumpers	2
USB port	Y
Serial interface	Y
Serial interface type	RJ-45
SmartSlot	Y
Battery
Battery technology	Sealed Lead Acid (VRLA)
Battery capacity	845 VAh
Typical backup time at full load	4 min
Typical backup time at half load	11.8 min
Battery life (max)	5 jaar
Battery recharge time	1.5 uur
Hot-swap battery	Y
Automatic battery test	Y
Cold start	Y
Design
Form factor	Rackmount
Product colour	Black
Rack capacity	3U
International Protection (IP) code	IP20
Display	LCD
Certification	REACH, CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, NOM, VDE
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 45 °C
Operating relative humidity (H-H)	0 - 95 procent
Storage relative humidity (H-H)	0 - 95 procent
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 15000 m
Packaging data
Rack mount kit	Y
Bracket	Y
Temperature sensor	Y
Quick installation guide	Y
Warranty card	Y
Package width	610 mm
Package depth	960 mm
Package height	330 mm
Package weight	66860 g
Weight & dimensions
Width	432 mm
Depth	719 mm
Height	130 mm
Weight	54430 g
Logistics data
Quantity per pallet	6 stuk(s)