The DIS-100G Series Gigabit Industrial Unmanaged Switches are equipped with a variety of port combinations including 10/100/1000BASE-T non-PoE or PoE ports, and SFP ports. These switches feature a robust design making them ideal for deployment in industrial and outdoor cabinet surveillance settings, capable of withstanding the harshest environments. In addition, the DIS-100G Series are Plug-and-Play, allowing for effortless and swift deployment.

Durable, Reliable, and Efficient
The DIS-100G Series switches are housed in a highly resistant IP30-rated metal casing to protect the switches from harsh environmental conditions. The high electromagnetic compatibility (EMC) protects the DIS-100G Series from unwanted effects when operating in environments with strong electromagnetic interference. The fanless design extends the life of the DIS-100G Series while also being able to operate in a wide temperature range from -40 °C up to 75 °C. For increased flexibility, the DIS-100G Series can also be mounted on a DIN rail or conveniently mounted on a solid surface wall. In addition, the DIS-100G Series supports dual power input which allows for a redundant power supply configuration to make sure the switches continue to operate in the event of a primary power supply failure.

Meanwhile, a powerful IEEE 802.1p Quality of Service (QoS) engine prioritizes network traffic so that time-sensitive data is delivered efficiently, even during bursts of high data traffic. This helps ensure an optimal experience for streaming critical data such as from surveillance and recognition systems.

Power over Ethernet Support
The PoE-ready DIS-100G-5PSW features a total PoE budget of 120 W, capable of supplying up to 30 W of power per port to connected PoE-enabled devices leveraging existing conventional Ethernet cabling. This effectively cuts down deployment times, reduces cable clutter, and eliminates the need for dedicated power supplies to allow PoE-devices to be installed in remote locations.

Green Ethernet Technology
The DIS-100G Series features green technology, including IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection. Energy Efficient Ethernet reduces the power consumption of the switches when network utilization is low, effectively lowering the cost of ownership during
periods of inactivity. Link status detection automatically powers down ports when there is no link detected, saving power when the connected device has been shut down or disconnected. Cable length detection automatically adjusts the power output of the port based on the length of the cable, reducing the power requirements of the switch to only what is necessary for the installation.

Limited Lifetime Warranty
D-Link offers a Limited Lifetime Warranty on the DIS-100G Series Gigabit Industrial Unmanaged Switches to further its commitment to product quality and long-term customer confidence.

Specification

Product
Product id	654083
Brand	D-Link
Partnr	DIS-100G-5SW
EAN/UPC code	790069437892
Data transmission
MAC address table	2000 entries
Switching capacity	10 Gbit/s
Forwarding rate	7.44 Mpps
Store-and-forward	Y
Jumbo frames support	Y
Jumbo frames	9000
Network
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
10G support	N
Full duplex	Y
Flow control support	Y
Auto-negotiation	Y
Auto MDI/MDI-X	Y
Broadcast storm control	Y
Management features
Switch type	Unmanaged
Switch layer	L2
Traffic shaping	Y
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	4
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
SFP module slots quantity	1
Fiber optic connector	LC
Weight & dimensions
Width	112.2 mm
Depth	29.1 mm
Height	89.4 mm
Weight	295 g
Packaging data
Package weight	500 g
Package width	140 mm
Package depth	178 mm
Package height	83 mm
Power
DC input voltage	12 - 58 V
Power consumption (typical)	2.74 W
Power consumption (max)	3.57 W
Power protection features	Over current, Reverse polarity
Multicast features
Multicast support	Y
Design
Product colour	Black
LED indicators	LAN, Power
DIN rail mounting	Y
Wall mountable	Y
Electromagnetic compatibility	FCC 15, EN 61000-6-2, EN 61000-6-4, EN 61000-4-2, -3, -4, -5, -6 (3)
Certification	IEC60068-2-6; IEC60068-2-27; IEC60068-2-32; UL 60950-1, CE, FCC, RoHS, WEEE
Operational conditions
Heat dissipation	12.18 BTU/h
Storage temperature (T-T)	-40 - 85 °C
Storage relative humidity (H-H)	0 - 95 procent
Operating temperature (T-T)	-40 - 75 °C
Operating relative humidity (H-H)	5 - 95 procent
Technical details
Shipping (inner) case height	205 mm
Pallet height (sea)	1980 mm
Quantity per pallet (sea)	540 stuk(s)
Number of cartons per pallet (sea)	54
Pallet gross weight (sea)	321560 g
Pallet height (air)	1365 mm
Pallet width	1100 mm
Pallet length	1200 mm
Quantity per pallet (air)	360 stuk(s)
Number of cartons per pallet (air)	36
Pallet gross weight (air)	220040 g
Quantity per shipping (inner) case	10 stuk(s)
Shipping (inner) case net weight	5000 g
Shipping (inner) case length	440 mm
Shipping (inner) case width	305 mm
Shipping (inner) case weight	5640 g
Power over Ethernet (PoE)
Power over Ethernet (PoE)	N