Abstract
The Lenovo CE0128PB Switch is a 1/10 Gb Ethernet (GbE) switch with Power over Ethernet (PoE) that delivers a compact, high-density, cost-effective GbE solution for network environments where space and power are at a premium. Featuring a small, 1U footprint, this switch is designed for access-layer deployments in branches, retail and workgroup environments, and campus networks. It can also be used as a management network switch in the data center infrastructures.

This product guide provides essential pre-sales information on the CE0128PB switch, its key features and specifications, components and options, and configuration guidelines.

This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, and other IT professionals who want to learn more about the CE0128PB switch and consider its use in IT solutions.

Introduction
The Lenovo CE0128PB Switch is a 1/10 Gb Ethernet (GbE) switch with Power over Ethernet (PoE) that delivers a compact, high-density, cost-effective GbE solution for network environments where space and power are at a premium. Featuring a small, 1U footprint, this switch is designed for access-layer deployments in branches, retail and workgroup environments, and campus networks. It can also be used as a management network switch in the data center infrastructures.

The CE0128PB switch offers 24x 10/100/1000BASE-T (RJ-45) fixed ports with Power over Ethernet (PoE) for powering attached network devices, such as such as telephones, video cameras, IEEE 802.11ac WLAN access points, and videophones. The switch also offers 4x SFP+ ports that support 1 GbE and 10 GbE optical transceivers, 10 GbE active optical cables (AOCs), and 10 GbE direct attach copper (DAC) cables. The switch supports a wide range of L2 and L3 features that provide performance, availability, security, and manageability for campus networks.

Did you know?
The CE0128PB switch can simultaneously deliver up to 15.4 watts of standards-based 802.3af Class 3 PoE to a maximum of 12 ports or 30 watts of standards-based 802.3at PoE+ to a maximum of 6 ports.

The CE0128PB switch supports the LLDP-Media Endpoint Discovery (LLDP-MED) protocol, enabling the switches to automatically discover Ethernet-enabled devices, determine their power requirements, and assign virtual LAN (VLAN) membership.

The CE0128PB switch supports stacking, enabling up to eight interconnected switch devices to be managed as a single logical device.

The CE0128PB switch supports AutoInstall, which enables a switch to automatically configure itself using the resources available on the network, without manual intervention.

Specification

Product
Product id	647081
Brand	Lenovo
Partnr	7Z360011WW
EAN/UPC code	889488479627
Data transmission
MAC address table	16384 entries
Throughput	95000000 Mpps
Latency (1 Gbps)	4 µs
Latency (10 Gbps)	2 µs
Number of IP interfaces	192
Jumbo frames support	Y
Jumbo frames	9216
Packet buffer memory	1.5 MB
Network
10G support	Y
Copper ethernet cabling technology	100BASE-T
Cable types supported	Cat5, Cat5e
Port mirroring	Y
Policy-based routing	Y
IP routing	Y
Full duplex	Y
Routing entries	512
Flow control support	Y
Spanning tree protocol	Y
Link aggregation	Y
VLAN support	Y
Virtual LAN features	Tagged VLAN
Number of VLANs	4093
Management features
Switch type	Managed
Switch layer	L2+/L3
Quality of Service (QoS) support	Y
Protocols
Management protocols	IPv4/IPv6
GARP VLAN Registration Protocol (GVRP)	Y
Routing protocols	VRRP
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	24
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Installed SFP+ modules quantity	4
Console port	RJ-45
Power connector	AC-in jack
Security
DHCP features	DHCP client, DHCP relay, DHCP server
Access Control List (ACL)	Y
Access Control List (ACL) IPv4 entries	256
Access Control List (ACL) IPv6 entries	256
Authentication type	RADIUS
Security algorithms	SNMP, SNMPv3, SSH
SSH/SSL support	Y
Weight & dimensions
Width	441 mm
Depth	254 mm
Height	44 mm
Weight	3700 g
Packaging data
Manual	Y
Power
Power supply included	Y
Number of power supply units	1
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (typical)	260 W
Multicast features
Multicast support	Y
Endurance
Mean time between failures (MTBF)	600000 uur
Design
Rack mounting	Y
Stackable	Y
Form factor	1U
Product colour	Black
LED indicators	Y
Number of fans	3 ventilator(en)
Airflow direction	Side-to-side airflow
Certification	FCC Part 15, Class A; UL 60950-1 / UL 62368-1, ICES-003, Issue 6, Class A; CSA C22.2 60950-1 / CSA C22.2 62368-1, NOM-19, IEC 60950-1, RoHS, CE Mark, TUV-GS, EAC, CCC GB4943.1, GB/T9254, YD/T993, CECP CQC3140, VCCI-CISPR32:2016, Class A, BSMI CNS13438, Class A; CNS14336-1, KN32, Class A; KN35, AS/NZS CISPR 32 Class A, CB
Operational conditions
Operating altitude	0 - 3000 m
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 procent
Performance
Physical stacking (units)	8
Power over Ethernet (PoE)
Power over Ethernet (PoE)	Y
Power over Ethernet (PoE) ports quantity	24
Power over Ethernet (PoE) power per port	30 W