This document describes ValueRAM's KVR26N19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of
19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

- Power Supply: VDD=1.2V Typical
- VDDQ = 1.2V Typical
- VPP - 2.5V Typical
- VDDSPD=2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for
- data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Single-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8
- via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.23” (31.25mm)
- RoHS Compliant and Halogen-Free

Specification

Product
Product id	574884
Brand	Kingston Technology
Partnr	KVR26N19S8/8
EAN/UPC code	740617270907
Warranty (months)	24 months
Memory
Internal memory	8 GB
Internal memory type	DDR4
Memory layout (modules x size)	1 x 8 GB
Module configuration	1024M x 64
Refresh row cycle time	350 ns
Row cycle time	45.75 ns
Row active time	32 ns
Unbuffered memory	Y
Weight & dimensions
Width	133.35 mm
Height	31.25 mm
Operational conditions
Operating temperature (T-T)	0 - 85 °C
Storage temperature (T-T)	-55 - 100 °C
Features
Memory clock speed	2666 MHz
Component for	PC/server
Memory form factor	288-pin DIMM
ECC	N
CAS latency	19
Memory ranking	1
Memory voltage	1.2 V
SPD profile	Y
Halogen free	Y
Product colour	Green
Cooling type	Heatsink
Backlight	N
Lead plating	Gold
Windows operating systems supported	Y
Linux operating systems supported	Y
RoHS compliance	Y
System requirements
Mac operating systems supported	Y

ValueRAM