16GB 2666MHz DDR4 Non-ECC CL19 SODIMM 2Rx8


Kingston Technology
Not in stock
€ 32,96
€ 39,88 incl 21% VAT
This document describes ValueRAM's KVR26S19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers.

- Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Dual-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- RoHS Compliant and Halogen-Fre


Product id 605234
Brand Kingston Technology
Partnr KVR26S19D8/16
EAN/UPC code 740617280623
Warranty (months) 360 months
Internal memory 16 GB
Internal memory type DDR4
Memory layout (modules x size) 1 x 16 GB
Module configuration 2048M x 64
Refresh row cycle time 350 ns
Row cycle time 45.75 ns
Row active time 32 ns
Weight & dimensions
Width 69.6 mm
Depth 3.7 mm
Height 30 mm
Operational conditions
Operating temperature (T-T) 0 - 85 °C
Storage temperature (T-T) -55 - 100 °C
Memory clock speed 2666 MHz
Component for Notebook
Memory form factor 260-pin SO-DIMM
CAS latency 19
Memory ranking 2
Memory voltage 1.2 V
Programming power voltage (VPP) 2.5 V
Halogen free Y
Lead plating Gold
Windows operating systems supported Y
Linux operating systems supported Y
JEDEC standard Y
RoHS compliance Y
Certification UL 94 V-0
System requirements
Mac operating systems supported Y